1 / 2
Corner Protector for Db Technologies Sub 18D
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Or other ones with a 10mm radius edge.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Dieser Eckenschutz wurde ursprünglich für meinen Sub 18D gefertigt, passt jedoch auf nahezu jede Ecke mit einem Radius von 10 mm.
Die Abmessungen betragen 60 mm × 60 mm × 50 mm, wobei alle drei Innenseiten einen Radius von 10 mm aufweisen.
------------------------------------------------------------
This corner protector was originally made for my Sub 18D, but it will fit virtually any corner with a 10 mm radius.
Its dimensions are 60 mm × 60 mm × 50 mm, with all three inner sides featuring a 10 mm radius.
Printer settings: depends on damping characteristics.
| Printer: | Artillery SWX1 | |
| Infill: | 25% | Perimeter: 2 |
| Supports: | No | |
| Raft: | No | |
| Speed: | slow | 30mm/S |
| Material: | Overture | TPU 95A |