Camera Arm for Xiao ESP32S3 Sense & MK4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple camera arm for the Xiao ESP32S3 Sense and Prusa MK4
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 1
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
A simple camera arm for the Xiao ESP32S3 Sense and Prusa MK4.
Used @brunnair's excellent case: https://www.printables.com/model/1043703-camera-case-xiao-esp32s3-sense
And a Spring Loaded Drop in M4 T-nut M4nEs: https://www.printables.com/model/891014-spring-loaded-drop-in-m4-t-nut-m4nes
I've used a 24v USB adapter wired onto the PSU to the camera turns on with the printer, and routed the power cable underneath using the stock route.
There is a space for a m2 threaded insert, the idea being that would allow you to adjust the camera angle and lock it in place, but I found the fit tight enough that I didn't need it.