1 / 3
Wheel of Time Extruder Dial Spinner for Ender 3 V3 KE SE — image 1
1 / 3

Wheel of Time Extruder Dial Spinner for Ender 3 V3 KE SE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extruder Dial Spinner and magnetic attachment for Ender 3 V3 KE SE

Rating
0 / 5
Likes
3
Downloads
23
Makes
0
Views
355
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked this design, but could not attach it to my Ender 3 V3 KE. I created an attachment that will allow it to be comfortably inserted into the extruder via 3 magnets.

The dial uses a 10mmx2mm magnet, and the attachment piece uses 2 8mmx2mm magnets.

To assemble:
(Get superglue handy)

  1. Insert 2 stacked 8mm magnets into the attachment piece. (There is only one way that it can be inserted.
  2. Glue the 10mm magnet into the slot on the back on the dial such that the 2 8mm magnets from step 1 will be attracted to the 10mm magnet when the larger end of the attachment piece is inserted.
  3. Put glue on top of the 10mm magnet and insert the attachment piece with the 2 8mm magnets on top of the 10mm magnet.
  4. When the glue dries, place in extruder. (It should not be tight in extruder hole or around the gear, it turns using the magnets).

To print:

  • If printing with 2 colors, use 2 different plates.
    • To use a different color filament on the dial, pause the print to swap filaments between layers 21 and 22. (That is assuming you are using 0.2mm layers and that the slicing results in 23 total layers). 
  • No supports
  • PLA
  • At least 3 walls
  • 0.2mm layer height
  • I used ironing on all top surfaces (feel free to try without)

Tags