Filament rack holder shelf made from 16mm tubes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament rack holder shelf made from 16mm tubes
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi! I spent a long time thinking about how to build a filament shelf for my setup. I looked through a lot of options, but none of them quite fit my needs, so I decided to design my own filament rack.
I initially tested a holder using an M12 threaded rod, but unfortunately, it didn’t have enough rigidity and bent under the weight of the filament. So in the end, I went with 16mm chrome-plated steel tubes — the kind typically used for store shelving. The 1,5mm wall thickness provides great stiffness, and they also look really nice and are quite cheap - around $7,50 for one 300cm piece. EAN 5904259598897. In Europe, it likely won’t be a problem to find the same or similar ones made of aluminum.
I tested the whole setup under load, and at 35 kg the wall plugs ripped out of the wall — but the holder itself remained completely intact.
Now it’s been a year since I installed it, and I haven’t had any unpleasant surprises. Everything is solid and stable.
The wall-mounted part comes in two versions — interlocking or single. You can choose depending on whether you want to hang more than one level.
Everything in my setup was printed in PETG with 4 perimeters/walls and 25% infill.