1 / 6
Shelly 1 - Wago holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shelly and Wago holder for Anycubic Mega S / Pro
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 186
- Makes
- 2
- Views
- 3,458
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Caution
The following work should not be carried out without electrical knowledge. I'm not responsible for any damage caused. Everything you do is done at your own risk.
Unplug the power cord before opening the printer.
BOM
- 2x Spade Connectors
- 2x Nut M3
- M3x min 12mm Socket Head Cap Screw
- 2x Wago 221-413
- 1x Shelly 1 configured
Assembly
The holder attaches to the inside of the Y-axis limit switch holes. You have to remove the limit switch beforehand. The existing screws must be replaced with longer ones.
Options
If you control the printer via Octoprint you can use the two plugins PSU Control and PSU Control - Shelly to switch the printer on and off.
