hue forge jewled lecerta
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
my jewled lecerta hue forge i made .
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Project: kratos.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x90mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#515a6c PLA BambuLab Tough Gray Transmission Distance: 1.8
#f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 4
#61c680 PLA BambuLab Matte Grass Green Transmission Distance: 2
#dde5ed PLA BambuLab Tough Cream White Transmission Distance: 11
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Gray
At layer #15 (1.28mm) swap to Mandarin Orange
At layer #17 (1.44mm) swap to Grass Green
At layer #20 (1.68mm) swap to Cream White for the rest.