1 / 8
Beer/Soda can opener/closer ... Otvírák/zavírák na plechovky — image 1
1 / 8

Beer/Soda can opener/closer ... Otvírák/zavírák na plechovky

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.38 – €0.46 net (excluding VAT)

For file: Otviraky plechovky_varianta 2_0.4n_0.2mm_PLA_MINIIS_29m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.42 excluding VAT (range midpoint).

Weight reported by the author
4 g
Print time reported by the author
28.8 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Beer or soda can opener/closer with custom embossed text ... Otvírák/zavírák na plechovky možností embossovaného textu

Rating
5 / 5
Likes
31
Downloads
367
Makes
3
Views
1,597
Reviews
3

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Public Domain

This model was printed on a Prusa MINI+ printer with custom embossed text without any support. It can therefore be printed without the option of a multi-colour printer. In Prusaslicer, on the bottom side you create your own embossed text as you wish. Set the depth of the text to 0.6mm and then adjust the filament colour change at 0.8mm height to 2 layers, then adjust the filament colour change again at 1.2mm height. Prusaslicer does warn about adding supports, but there is no need and the result is great. Not only does this opener allow you to cover the hole from insects, but it can also be closed completely against possible spills. This opener can also be hung as a keychain.
Very suitable as a personal gift / treat.

If someone just wants to print without editing and is satisfied with the text “Enjoy”, they can download the G-code directly.

Printed with PLA
15% fill

Tento model tištěn na tiskárně Prusa MINI+ s vlastním embossovaným textem bez jakýchkoliv podpor. Lze tedy tisknout i bez možnosti vícebarevné tiskárny. V Prusasliceru, na spodní straně si vytvoříte svůj vlastní embossovaný text dle libosti. Hloubku textu nastavte na 0,6mm a následně si upravte změnu barvy filamentu ve výšce 0,8mm a to na 2 vrstvy, následně si znovu nastavte změnu barvy filamentu ve výšce 1,2mm. Prusaslicer sice upozorňuje na přidání podpor, ale není třeba a výsledek je skvělý. Tento otvírák umožňuje nejenom zakrytí otvoru před hmyzem, ale lze ho i úplně zavřít i proti případnému rozlití. Tento otvírák lze i zavěsit jako klíčenku.
Velice vhodné jako personální dárek / pozornost.

Jestli chce někdo pouze tisknout bez úprav a spokojí se s textem "Enjoy", může si stáhnout přímo G - code. 

Tištěno s PLA
15% výplň