1 / 3
Foil Screw Fixture (Fanatic)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixture to keep foil screws and nuts together so none goes lost.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
I found myself counting screws way too often to not miss any when i am at the seaside. This part organizes all foil screws so that i can see at first glance if something is missing.
For Fanatic foil screws, nuts and torx:
- 5x M8x35
- 5x M8x30
- 2x M6x20
- 1x T45
- 1x T30
Print:
- orient the part with all screw holes vertically; t-nut outlets on top
- layer height: 0.2mm
- walls: 3
- infill: 5% orthogonal
- support: no
- brim: no
- skirt: 2 loops
- top/bottom layers: 5/4
See also the FreeCad project file on GitHub: foil-screw-set.FCStd