Box for silacagel in closed filament box. Boxík pro silacagel do uzavřeného boxu na filamenty.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silacagel in dry filament box is good to have, but it's better if it's more organized, that's what the extra box is for.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Box for silacagel in closed filament box.
Designed for 3D printers who use closed dry filament boxes for printing ... specifically this type:
https://www.aliexpress.com/item/1005007712210110.html?spm=a2g0o.order_list.order_list_main.109.8ca51802jNufgj
and want to use silacagel (not bagged) to minimize moisture inside the box.
Unfortunately, silacagel just thrown into the box causes the filament holder to twist and the individual silacagel beads get into the bearing areas and prevent the filament from rotating while printing.
Box dimensions:
length ... 160 mm
width ... 80 mm
height ... 25 mm (including 2 mm feet)
The feet can be simply glued on after printing using a second glue.
Easier insertion and removal when changing the silacagel.
Printed with PLA.
Option 2 is available for better moisture absorption and greater air access to the silacagel.
Boxík pro silacagel do uzavřeného boxu na filamenty.
Určeno pro tiskaře 3D tisku, kteří používají uzavřené suché boxy pro filamenty při tisku ... konkrétně jde o tento typ:
https://www.aliexpress.com/item/1005007712210110.html?spm=a2g0o.order_list.order_list_main.109.8ca51802jNufgj
a chtějí použít silacagel (ne v pytlíkách) pro minimalizaci vlhkosti uvnitř boxu.
Bohužel silacagel pouze vhozený do boxu způsobuje kroucení držáku filamentu a jednotlivé kuličky silacagelu se dostávají do míst, kde jsou ložiska a zabránit otáčením filamentu při tisku.
Box má rozměry:
délka ... 160 mm
šířka ... 80 mm
výška ... 25 mm (včetně 2 mm nožiček)
Nožičky po výtisku lze jednoduše přilepit pomocí sekundového lepidla.
Jednodušší vkládání i vyndání při výměně silacagelu.
Tištěno s PLA.
K dispozici je varianta č.2 pro lepší absorpci vlhkosti a výraznější přístup vzduchu k silacagelu.