G1/4 reservoir anti cyclone disk and bubble strainer insert for (printer) watercooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought a freezemod pump with a short reservoir (40mm ID) and it kept sucking in air. This fixes the issue
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
inserts for brass thread <-> pneumatic tubing fittings and 40mm internal diameter G1/4 reservoirs
Reduces Pump noise and the reservoir looks better
the brass part of the fitting has a cavity of 10.5mm depth and ≥9.6mm width. The insert has a slight press fit into position.
print settings:
ASA or PETG as filament.
I recommend the TPMS-D infill pattern from the latest OrcaSlicer (nightly) for the insert, Gyroid works well too.
No top layers, no bottom layers, no outer or inner walls, ~30% density
The disk is printed upside down. then simply pushed into the reservoir. The ring should fit with more than enough clearance into the G1/4 thread.
print settings:
ASA or PETG as filament.
At least one solid wall.
Enough bottom layers so all of the initial 0.6mm are solid