1 / 2
Stand for test tubes and pipettes / Ständer für Reagenzgläser und Pipetten — image 1
1 / 2

Stand for test tubes and pipettes / Ständer für Reagenzgläser und Pipetten

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stand for test tubes and pipettes / Ständer für Reagenzgläser und Pipetten

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
142
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

The stand can hold test tubes up to a diameter of 28.5 mm and pipettes up to a diameter of 12.5 mm. The pipette holder is equipped with a drip tray.

Assembly:

Eight M3x6mm screws are required for mounting.

Pressure:

Material: PETG (certainly also printable with PLA but for better durability I recommend PETG)
Resolution 0.2 mm layer height with 0.4 nozzle or 0.32 with 0.6 nozzle
Infill 15%
Support: Not necessary. The required support is integrated in the model and can simply be broken out after printing.
 

If you like the model a Like and a Make would be nice. Thanks in advance. 
I am always open to suggestions for improvement or changes.

_________________________


Der Ständer kann Reagenzgläser bis zu einem Durchmesser von 28,5 mm und Pipetten bis zu einem Durchmesser von 12,5 mm aufnehmen. Die Pipettenaufnahme ist mit einer Tropfschale ausgestattet.

Montage:

Für die Montage werden acht M3x6mm Schrauben benötigt.

Druck:

Material: PETG (sicher auch mit PLA druckbar aber für bessere Haltbarkeit empfehle ich PETG )
Auflösung 0,2 mm Schichthöhe mit 0,4er Nozzle oder 0,32 mit 0,6er Nozzle
Infill 15%
Support: Nicht notwendig. Benötigter Support ist im Modell integriert und kann nach dem Druck einfach ausgebrochen werden. 
 

Wenn euch das Modell gefällt wäre ein Like und ein Make nett. Danke dafür im Voraus. 
Für Verbesserungs- oder Änderungsvorschläge bin ich immer offen.

Tags