1 / 3
Jam-Jar Skrew-On Spout
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A screw-on spout for TO 82 jam-jars.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
TO82 jars are very common, they are for example used by a popular french jam maker.
Does not require any supports when printed upside down.
Recommended to print using a small layer height.
The gasket is necessary, since low viscosity liquids, like water, might otherwise leak in small amounts.
The gasket should be printed with flex material, e.g. something like TPU 95A.
The gasket has a small taper on one side, and should be installed with the taper-side towards the jar and the flat-side towards the spout.
Using a sealant like Dichtol is also recommended.