1 / 9
Case for Raspberry Pi 5 with PCIe M.2 NVMe and active Cooler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is for Raspberry Pi 5 with PCIe to M.2 NVMe board, active CPU Cooler and passive NVMe Cooler.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 53
- Makes
- 0
- Views
- 503
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This case is for
- Raspberry Pi 5 with
- Geekworm X1001 (PCIe to NVMe),
- Geekworm H505 (active cooler),
- 2280 disk and
- NVMe passive cooler (i.e. ThermalrightTR-M.2-2280).
Requires
- 4x M2.5x6
- Layer height: 0.2mm
- Infill: rectilinear 10%
- Support: just bottom part, type normal, style snug
- Skirt: 2 loops
Note
- The optional brackets are work in progress (not very stable). If you need them, use washer each hole (no counter sunk screw). Without washer the screw will immediately delaminate the hole.
Source
See also the FreeCad project file on GitHub: case.FCStd