1 / 10
EV Charger Cable Holders / Mounts / Hooks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EV Charger Cable holders / hooks that screw into the wall.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 102
- Makes
- 0
- Views
- 1,119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to hold the Emporia 48A EV charger cable which has a diameter of about 23mm (0.9 inches). The hooks themselves have a 26mm inner diameter. I included STEP files so you can try to change the diameter of the hooks if you would like.
Screw holes have a 4mm diameter and have a flared opening so the screw heads can be flush.
Files are for flat, right curve, left curve, and both curves hooks.
I would recommend printing with at least:
- 3 perimeters
- 15% infill
- 0.2mm layer height
The flat hook should be printed on its side, but all angled hooks should be printed on their back with supports.