hueforge scooby doo haunting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
filament painting of a dark mansion with a van left outside
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
the last scooby doo case unsolved..
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.2mm
Filaments Used:
PLA flashforge Black Transmission Distance: 0.3
PLA elegoo Space Gray Transmission Distance: 2.1
PLA elegoo White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Space Gray
At layer #10 (0.88mm) swap to White for the rest.