1 / 3
Damping foot - Voron 2.4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d printed rubber foot (2 pieces) for a voron 2.4 and other printers. Damping against vibrations.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 43
- Makes
- 0
- Views
- 1,032
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
I experimented a bit with the feet of my voron 2.4 printer and my latest design consists of 2 parts: a harder outer shell for stability (PETG) and a damping inner part from TPU.
The hard shell can be mounted to the frame easily. The TPU core is just pressed into the shell and held inside by friction and the weight of the printer.
The TPU is a nice addition which works very good. But if you only want a simple foot then the shell will also work. That's what i previously used.
Printing:
Shell:
- 2 perimeters / 3 top and bottom layers/ 15% infill / 0.6mm nozzle /0.3mm Layer height
Core:
- 2 perimeters / 3 top and bottom layers/ 10% infill / 1.2mm nozzle /0.5mm Layer height