1 / 6
Engine scratch protection for KTM 890
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eengine sratch protection cover (from boots). No bolting needed for installation.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 41
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I have designed an engine protection cover to prevent scratches from boots.
The installation doesn’t require any bolts and is easily removable. The assembly requires 3 magnets: one 15 mm in diameter and two 10 mm magnets, though it can also be installed without magnets—it holds well by fitting tightly into the swingarm bolt hole. Some filing may be necessary after printing.
I used ASA for my cover, tested it (offroad included), and so far it hasn’t melted. ASA is holding up well.
The print requires supports.