Yamaha Tracer 9 (GT+) 2025 spacer for SW Motech pro tank ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ring to mount the magnetic Pro tank ring to the fuel cap of the Tracer 9 GT+
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 92
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
For some reason every motorcycle manufacturer has different fuel tank covers, even changing them per model year, or - in this case - put plastics around the tank ring so that a special item needs to be bought.
I have standardised on SW Motech pro tank bags - which I love - but found myself with three magnetic rings which do not fit my 2025 Yamaha Tracer 9 GT+, requiring me to buy yet again another ring @ 70 euros.
So I designed a spacer ring to fill the gap. The biggest risk would be delamination of the printed layers, so I designed the depth of the bolt mounting holes to support the material.
Printed in PETG, 3 perimeters and 20% Gyroid infill, supports to build plate only.
Hardware needed:
4 x M4x16 cilinder head bolt
5 x M5x45 cilinder head bolt (note: I ended up using only 3, as this would be strong enough)
The M4 bolts are mounted first from the bottom, then the spacers is mounted to the tank by removing the original bolts and using the M5's instead. The the magnetic ring can be mounted to the M4 threads that stick up.
The tolerances are quite tight, which may impact fitment in case you use a different filament. Opening the holes up with a drill should fix this. The holes around the bolt head allow for some tolerance.
