FIFO Can dispenser for cans (Ø~99mm H~119mm 1kg 850ml 30 oz.)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FIFO (First In First Out) Can dispenser for international 1kg 850ml (30 oz.) cans.
- Rating
- 5 / 5
- Likes
- 334
- Downloads
- 494
- Makes
- 2
- Views
- 4,304
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max).
The files provided are only for the left side and need to be mirrored in the slicer for the other side.
Print settings: Infill=15% gyroid /Layer hight=0,2mm
Materials & Tools required: M5 Threaded rod / M5 Nuts / M5 Washers / Rubber mallet & a piece of wood (for precise hammering blows) / Knife or Sandpaper (for fit adjustment if necesery) / Some rubber feet
Assembly: Use a rubber mallet to gradually hammer the puzzel pieces together, note that the connection is designed to be a mostly 0 interference fit except for the inner and outer corners (Depending on your printer accuracy it may be necessary to sharpen these corners for a looser fit). Cut the M5 threaded rod to length and bolt the pices together.
It is possible to assemble multiple units as one pice using a longer M5 threaded rod that passes through all units.