Peg Perego Ranger RZR Drive Gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drive gear that connects the motor assembly to the wheel for a Peg Perego Ranger RZR. It may work for other models too.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
Wife accidentally threw this gear away when replacing the wheels on our kids jeep. This gear is not separately available from Peg Perego but must be bought as part of the fairly expensive motor drive assembly.
I started with a similar part created by stella101 (https://www.printables.com/model/538964-peg-perego-drive-gear/files) that had the same interface on the wheel side but needed a totally different geared interface into the motor assembly.
I printed this with a 0.6 nozzle, since my 0.4 nozzle was clogged at the time. I had never used a 0.6 nozzle before, so I don't think the setting were dialed in quite right, but it printed good enough to get the job done. I used 6 walls and 50% infill, and it seems fairly strong. Print orientation I used was cross-side down with supports.