1 / 1
Espresso Puck Screen Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds 2 puck screens of diameter ~58mm but can be resized or reconfigured.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Whipped up a simple stand in OpenSCAD. Currently configured for 2 puck screens of ~58.5mm diameter but can be reconfigured via the provided .scad file.
The slot width is .75mm which works well for .25mm screens, but may need to be increased for thicker screens.
Printed on PETG (but should be fine with PLA also).
- 0 top/bottom layers
- 15% gyroid infill