1 / 4
LECHUZA-Style sticks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A LECHUZA - style - stick for use with LECHUZA plant pots
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 1
- Views
- 99
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jun. 28, 2025 V1.0b8:
- First release on printables
The first version (/model/492481) was a quick and dirty solution created with Thinkercad.
After a request from a user, I decided to redesign it from scratch in fusion360. Still a quick but less dirty solution ;)
There are 3 different versions with different hole diameters (4/5/6mm) , so that you can use different water cords.
The provided 3MF file can be used with:
- Orca Slicer/Bambu Studio: Geometries , filament and settings
- Prusa Slicer: At least the geometries
- Others: May or may not work. Please do not expect any support for other software
Printing:
- USE PETG, as it has the flexibility needed for the assembly
- Layer height 0.2
- 3 Walls
- No supports or brim
Assembly:
- Just push the stick into the handle
- You'll probably need some force
- Once assembled, it will be quite difficult to disassemble. This is intentional!