1 / 6
Lexar SD Card Reader Encloser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this encloser as a solution to my card reader being moved around from my desk in my absence.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 1
- Views
- 48
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Was a bit tricky to model due to its odd shape. Printed on a PRUSA Mk3s. It can be printed using minimal supports on critical areas only but i got best results with supports everywhere (SNUG)
It requires six nuts (M2 1.68mm thick) to be place inside. Also requires six screws (M2 12mm) for assembly
It can be screwed to wooden surface or a double sided tape would work too.
Material used : PLA Matte
Printer : PRUSA Mk3s