Pegs and storage cap for folding cribbage board
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.06 – €0.08 net (excluding VAT)
For file: CribbagePegs_0.4n_0.2mm_PETG_MK4IS_4m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are accessories for Chris W's excellent folding cribbage board design.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 158
- Makes
- 2
- Views
- 525
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
I love Chris W's cribbage board design. and have made a few. I had a couple issues that I decided to provide a solution to.
First I found the pegs a bit small for easy handling so I designed some slightly larger ones. And second the storage pocket needed a cap so that the extra pegs don't fall out when you have the board open.
I thought I would post them as accessories for the design, I hope they are helpful.