1 / 2
Nested spheres
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A truncated sphere free to move but captive in a larger truncated sphere
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just for fun - no known practical, educational, or artistic merit.
I've printed it successfully two ways:
- 0.6 mm nozzle, 0.2 mm layer height. For this it needed supports to keep the tops of the side holes from sagging and/or curling. Use a support angle of 37° to avoid generating unnecessary supports for the inner edge of the top hole.
- 0.4 mm nozzle, 0.15 mm layer height. For this print I didn't need supports.
In both cases I used a matte PLA at a reduced temperature of 195 °C to reduce curling (and to avoid stringing, in the case of wood filament). Suggest printing with all perimeters.