Super small Strain relief for hanging
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.62 – €0.76 net (excluding VAT)
For file: Mount_01_0.2mm_PETG_MINI_51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 50.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lamps that hang from the ceiling do need strain relief. This one is very compact and resizable.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 74
- Makes
- 2
- Views
- 523
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Public Domain
This strain relief can be hung at the little hook that's in the ceiling box. It needs very little space because it has only two instead of the normally three holes to lead the wire through. A nut fastens the wire and can also be used to fasten a cap or anything else. See my ceiling cap for an application (Minimalistic Ceiling Cap for hanging lamp. Parametric FreeCad.).
In the FreeCad file the diameter of the cable can be changed, which will automatically change the diameter of the holes and the size of the nut. Also the length of the bolt can be changed to fit a larger cap or for other reasons. A ready to print file is included for cable with a diameter of 6 mm.
Best printed with PETG and 100% infill for strength reasons.