1 / 2
REMIX - Chromecast Wall Mount - Improved Fitment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved fitment for the controller. Original by @Werner_65365. This is the best looking wall mount for this controller.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
Settings I used:
Infill: 20%, cubic
Walls: 2
Top and bottom layers: 3
Supports: Tree, everywhere
Nozzle: 0.4 mm
Layer height: 0.2 mm
Tested on:
Ender 3 V1
Direct drive
Creality PLA
200C nozzle
50C bed
3 mm retraction
A possible foreseen failure point is that the lip holding the controller in is only 1 mm thick; I might need to increase that thickness depending on how well this holds up.
UPDATE
2 months later, still holding up great on my wall, 1 mm lip thickness seems just fine