1 / 17
V.O.C. Ex (VOC & Solder Fume Filter) — image 1
1 / 17

V.O.C. Ex (VOC & Solder Fume Filter)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small mobile Volatile Organic Compound Extractor / Solder Fume Filter

Rating
0 / 5
Likes
0
Downloads
19
Makes
0
Views
158
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Hi,

At work, we occasionally use a 1K silicone adhesive that emits an unpleasant odor. Unfortunately, simply opening a window introduces dirty outdoor air, and our big "mobile" air scrubber is either broken or needed elsewhere. So I designed this little helper: the "V.O.C. Ex" – short for Volatile Organic Compound Extractor – to improve air quality and provide additional comfort and health protection for our workers.

The basic principle is simple: PWM-controlled PC fan draws in air from the front and pushes it through a filter medium – in my case, 4 mm activated carbon pellets.

It can be used as a local VOC scrubber, a solder fume extractor, or even as a cooling fan in summer (just remove the filter insert 🙂).

An added bonus: unlike our air scrubber system, this unit is nearly silent and highly mobile.

The design isn't “perfect-perfect” by my own standards, but it gets the job done – and my colleagues clearly noticed and appreciated the improvement in air quality. That said, please note this is only a subjective evaluation ("sniff test") and not based on professional air quality measurements.


Print Settings:

  • Layer height: 0.3 mm (0.4 mm nozzle)
  • Perimeters: 3
  • Infill: 10–15% gyroid
  • Solid layers: 3 top and 3 bottom
  • Supports: Only needed for the Rear Cutout Panel
  • Print orientation: As shown in the pictures
  • Print: all parts ~380 gr. in 11h 30min

Mesh inserts:
Printed with 0.2 mm layer height
Both mesh parts are solid objects in the design files
The mesh pattern is generated in the slicer using a cylindrical modifier (108 mm diameter)
Modifier settings: 0 top & bottom solid layers
Infill: 20% honeycomb, note: higher infill reduces airflow; lower infill creates gaps larger than the carbon pellets


BOM (Bill of Materials):
See the provided BOM file.


Assembly Notes:
I hope the pictures make the assembly self-explanatory, but here are a few important notes:

  • Don’t forget to insert the M4 nuts for the feet before closing the case
  • The rear mesh inside the filter tube is a snap-fit; the front mesh is inserted and then rotated to lock in place
  • The filter can be changed via the rear cover – after full assembly, only the rear cover and 4 screws need to be removed
  • In the final version, I used the 20 mm filter tube along with a 22 mm spacer. A 35 mm filter insert is also included in the design files, but it restricts airflow without noticeably improving filtration performance
  • A blank (non-cutout) version of the Rear Cutout Panel is included

 

Happy printing!

Tags