1 / 4
Tiki-Planter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tiki-Figur turned into a plant pot
- Rating
- 4.667 / 5
- Likes
- 46
- Downloads
- 207
- Makes
- 3
- Views
- 576
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The planter consists of two parts, the outer pot and the inner pot. Together they are perfect for your indoor plants. There is a small version of 8cm and a big version of 24cm (300%).
The bottom of the planter is not a flat surface. This was no issue with my setup (Prusa Core One, HF 0.4 nozzle, PLA). You can, however, lower the pot 1mm into the priniting plate in the slicer, which will cut away everything below the surface of the plate. Then you'll have a perfectly flat surface. This works with both the big and the small version.