Bell MX-9 Helmet Vent Clip (Replacement / DIY Fix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for broken vent clip on the Bell MX-9 ADV helmet. This is a 3D-printable replacement
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a quick fix for a broken or missing top vent clip on the Bell MX-9 Adventure helmet. I designed this after losing mine mid-ride and not being able to find spares anywhere.
It’s not a perfect OEM replica, but it works. You’ll probably need to do a bit of trimming/sanding to get it sitting right. Using a sharp blade and a test fit or two should do the trick.
It snaps in place and holds well once adjusted. I’ve used it for a few rides now with no issues.
Recommended material: PETG – stronger and more heat-resistant than PLA, especially if your helmet's baking in the sun on the dash or strapped to your bike.