Marimex ProStar Profi 6 (Blackstar 6) 6-way valve/container + mandrel seal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prostar Profi 6 (Blackstar 6) 6-way valve/container + mandrel seal
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have Marimex BlackStar6 pool filtration several years and I noticed that 6-way valve/container seal (no. 9 on the image) is crushed and I have to tighten the collar almost to the stop. I wanted to buy new seal, but I found none with this diameter (148mm inner) and thickness (12mm). So I made it my way. I also found mandreal seal (no. 8 on the image) cut, but shops were already closed that day, so I made it too.
Valve seal:
- print oriented as is using TPU
- 0.2mm layer height, 7 perimeters, 50% honeycomb infill, seam position “nearest”
- no supports needed
- brim recommended when printing the big one
Mandrel seal:
- print oriented as is using TPU
- 0.2mm layer height, 3-4 perimeters
- no supports needed
The valve/container seal has flat surface with circular channels - they should face up against flat surface of the valve when assembled. Rounded part should face down against skewed surface of the container.
The mandrel seal is symmetric.