Short bath tap spout
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.76 – €2.15 net (excluding VAT)
For file: spout_Partfull_proto4_0.4n_0.2mm_PETG_MK4S_1h58m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.95 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple design for a short bath tap spout.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
My family bathroom had a very long tap spout, which interfered with lower legs and knees of adults and heads of little playing people. Because this is an ‘external’ part of the tap, there was no chance of it adhering to any standard or expected measurements. But the spout itself is held with two o-rings and one grub screw. So… to FreeCAD!
Don't get me wrong, this is more a way of sharing the CAD file to hopefully help somebody else model a spout than the notion that the model - as it is - works for any other tap. Naturally the FreeCAD model is available for download.
The model needs printing standing up from the tap end, it could do with supports for the o-ring grooves, the internal screen and this also increases the adhesion to the print bed. I used PETG with very low infill. For strength, I would probably increase the perimeters before the infill.
I intend to swap the model with some frequency, as I do not trust the printed surface of PETG to not accumulate mould and other rubbish (inside and outside), so be wary of this.