Duplo 2x2 Offset Brick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A screw-driven offset brick for adapting Duplo bricks to other things that have non-Duplo brick spacing.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 34
- Makes
- 0
- Views
- 635
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
Rationale:
I wanted to be able to use https://www.prusaprinters.org/prints/26557-wooden-train-brio-ikea-to-duplo-adapters-mini on Duplo build plates, but the length of the various Brio and Melissa and Doug tracks doesn't correspond to the grid on Duplo.
I started off with a Duplo brick generator and modelled a part that suited my purposes.
Requires:
M3x20mm socket head screw (such as included in the spare parts with Prusa MK3S)
M3 hex nut (such as included in the spare parts with Prusa MK3S)
Printing Notes:
I printed these with support.
Assembly:
- Remove support material
- Insert captive nut into holder in “Top Brick” (hold in place with a finger)
- Lay head of socket screw in feature on the top of the “Bottom Brick”
- Slide “Top Brick” onto rails of “Bottom Brick” and engage socket head screw with captive nut.
- Tighten to desired position using a hex key.