Daruma Otoshi - Japanese Traditional Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of a traditional Japanese kid's toy.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 72
- Makes
- 1
- Views
- 737
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a model of a traditional Japanese kid's toy. The Daruma doll is stacked on top of five of five pieces, and players use a small hammer and take it in turns trying to hit the bottom piece of the stack out without knocking over the whole thing.
Here's a video that probably explains it better...
All six main game parts have a vertical hole running through the middle, meaning you can display this stacked with the hammer running through the hole, holding everything in place.
Parts (7)
top.stl
Go for a decent infill with this one, you want it to weight about 30g. It's important the bottom surface is nice and smooth, give it a sand just to be safe. I'd also recommend painting the face black and red as illustrated on the render.
piece x5.stl
Print five of these! You want these weighing around 12- 15g, 30% infill was sufficient for me. Smooth top and bottom surfaces are key, you might want to give them a good bit of sanding, I'd also highly recommend painting them different colours!
hammer - head.stl
This is probably going to see a fair bit of action, so I'd again give it some good infill so it doesn't break quickly.
hammer - handle.stl
I don't recommend printing this, but including it here just in case you're crazy enough! A much better alternative would be a piece of 5mm dowel, around 160mm length.