MK3 Z-Axis Bowden Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bowden guide mod for Prusa machines
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 53
- Makes
- 4
- Views
- 671
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bowden mod to avoid the heavy filament spool on top of your printer, place a spoolholder or even a filament dry box next to it
Its “stackable” so you can add the top guide later if you want
There is 10 and 15 cm arms, also there is top z axis mod for the right and left sides!
the bowden-arms has screw threads so its easy to screw in the bowden coupler (10mm)
Parts needed :
1x M3 x 10mm+ bolt
1x M3 x 14mm+ bolt ( if you want to use the top guide )
1x M3 Nut
1x 10 mm bowden coupler
I have to say, I was inspired by Greg Greenaae so I made this from scratch so you also would be able to screw the arm off when you dont need it
---------------------------------------------------
My settings:
Print the items as imported no need to adjust the orientation
PETG for the z-axis-tops and recommend PLA for the arms and top-guide
Layer height: 0.15-0.2
Perimeters: 3
Infill: 50-60%
No supports