Borromean Rings Print in place/no support
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.45 – €0.55 net (excluding VAT)
For file: borromean rings small.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 42 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Borromean rings printed without support
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 64
- Makes
- 1
- Views
- 509
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Math
- License
- Creative Commons — Attribution
MUST USE BRIM!!!!
A print in place (no support) of Borromean Rings, three interlocked rings:
https://en.wikipedia.org/wiki/Borromean_rings
not for the faint of heart….. this print will test everything, even your nerves. The contact points are tiny, the length on Z is a lot, steep angles, some bridging. Your printer should be in tip-top shape to print this.
good luck :D