V0 Dragon Burner V8 ZeroClick Heatset + Countersunk magnet mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reliable ZeroClick attachment with screw down magnets
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I got tired from the magnets falling out, gluing them down sucks since the glue can spill out and mess with the conductivity or flatness of the mating surface
I got a KlickyPCB kit and with it came these countersunk screw down magnets and M2 heatset inserts
Assembly is simple, carefully insert the heats into the cowl coming in from the magnet side, you want them to be flush.
Strip 1.5cm of thin stranded wire, this will be your probe wires, you want to push them through the heatset inserts from above
Push on your magnets (get the orientation right so it attaches to the probe) and screw into the heatsets
The pressure from the screw will hold the wire strands and creating a circuit when the magnets attach
Included is just the .step, just slice throw into your slicer and reorient to have the hotend fan side facing down