Cutlass Foam Dart Blaster 0.3.6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A talon-fed springer primary geared for 200-250fps. Adjustable stock, worker seagull springs, mlok compatibility.
- Rating
- 5 / 5
- Likes
- 181
- Downloads
- 332
- Makes
- 1
- Views
- 3,508
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After over six months of work, I am proud to present the Cutlass. It's a talon-fed pump-action springer using Worker Seagull springs. It used a biased trigger to get a slopless crispy trigger pull. It's compact, has an adjustable stock, mlok compatible slots, sling points, and more.
Link to the BOM
Link to the Assembly Guide
It's still pretty fresh out of the oven, so issues may occur. I have been able to implement limited feedback from competition use already, so fingers crossed nothing major has to be changed.
I'm currently in talks with hobby shops to get hardware kits stocked, OOD already has a queue of blasters they are adding to the store, so hardware may take a while to arrive.
I've provided a limited selection of files you can download individual on this page, the rest, such as STEPs, STLs, and other stuff are all available in the ZIP file below.
Thanks to Mark Ghebrial, John Biederman (aka lunko/taffy), Sillybutts, Dan from Orion Blasters, Rainy for beta testing, and the foam blaster community for all the help they have given me over the course of this project.
Update 0.3.3: Noticed that frame bars used geometry that was not drafting-friendly. Redid some dimensions. Only print changed was the receiver.
Update 0.3.4: Redid print clearances around frame bars
Update 0.3.5: Added an alternate handguard with no MLOK slots.
Update 0.3.6: Added a spring guide in the spring cap to prevent buckling.