LED light Nodes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach LED strip, and make yourself emergency light in the house. Non intrusive, simple and stylish.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3D model description
*Decorative or mergency LED light Node
*Easy to print / suportless
*Snap fit
!Closes with satisfying click!
*Stylish design
Fits 4 segments of standard LED strip, 12 diodes. (No need to glue strip)
Lot's of empty space to fit wiring inside.
Wall mounting with double sided tape or with screws.
Both models included.
(*I used 9W per meter stripe, which gives me 1.4W per Node.
Designed as emergency light to auto engage after power outage.
1A fuse. Can acomodate small led light power supplies.
I use mine with central battery, and direct wiring.)
I printed with PLA mostly, but it can be printed with other plastics for other finishes. (For best look, print first layer concentric)
3D printing settings
Standard Node size is 60mm in diameter, and 15mm height.
Coned one is also 60 mm in diameter, but 20 mm height.
For FDM printers. (Should be printable on resin aswell)
Settings:
-Nozzle 0,4 mm; Leyer 0,2mm; wall thickness 1,2mm;
*Print inside to outside to prevent failing overhanged walls.
Top layers 3
Botom layers 5
*Initial layer to CONCENTRIC for best look!
-Infil 20% Gyroid
Print speed medium. (mine was at 100mm/s)
I had combing disabled, no need..
Fan speed 100% at layer 2 for PLA
Generate support for Coned Nodes.
Don't use adeptive layers ;)
Best of luck printing