1 / 2
Max Flow Test for Bambu Lab H2D/H2S – 15-65 mm^3 – V2.1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because it's missing from Bambu Studio for H2D.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 444
- Makes
- 0
- Views
- 1,883
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
15 to 65 mm3.
USAGE
- Open 3mf file
- Select PLA/PETG or ABS in “Project >” section of filaments menu.
- Adjust Temperature in the filament settings to a desired one.
- Print it. :)
- Observe height H in mm where defects start to appear.
- Your max flow will be: 15+H.
If you want to test any other filaments for which preset if not provided:
- Choose desired filament profile
- Select your nozzle type Standard or High Flow
- Set Flow ratio to 1
- Set Max volumetric speed to 200
- Set Ramming volumetric speed to 10 (or what was the Max volumetric speed above originally)
- Set Cooling > Slow down for better layer cooling to Off
INTERPRETING RESULTS
- For maximum print quality, look for where the seam starts having gaps.
- If you're making quick prototype, 90-95% of absolute max flow (where you starting to see abnormalities in the walls) will still provide good results.
CHANGELOG
- V2: Increased range to 65mm3. Added support for 0.4mm high flow nozzle. Added PETG and ABS presets.
- V2.1: Fixed flow rate for project filament presets (to 1); corrected line width to achieve 15-65 mm3 with flow=1.