Beelink ME mini NAS Modkit V1.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modkit to replace the lower part of case for Beelink ME mini NAS
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 211
- Makes
- 2
- Views
- 2,997
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Modkit is divided into two parts
Upper part
Lower part
How to install
0. Remove the Lower part of the stock case and the Motherboard
1. Mount and Support the motherboard using the Upper part of Modkit
Apply foam tape (2mm thick) in 2 locations
Install insert nuts (M1.7 x L2 x OD2.5 * 4pcs) into the 4 holes and reuse the stock screws
Be careful to align the holes of M/B with the mounting pins of Modkit
2. Attach the Upper part of stock case to the Upper part of Modkit
Use screws (M2 x L16 * 4pcs)
3. Prepare for attaching the Lower part of Modkit
Install insert nuts (M3 x L4 x OD5 * 4pcs) into the 4 holes
4. Install Fan into the Lower part of Modkit
Use 80mm Fan (15T or thinner)
Use screws and nuts (M3 size, recommend to use that included in TL-8015)
Fan cable can be pulled out through the hole
5. Attach the Lower part to the Upper part of Modkit
Use screws (M3 x L5 * 4pcs)
6. Turn on the Fan and control the speed
Use PWM 4-pin fan controller
Change Log
V1.1 (2026-01-18) : Updated Lower part to enhance air flow and added model for 25T fan