Fisher and Paykel Dishwasher Side Rack Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For some Fisher and Paykel Dishwashers. This is the side rack connector piece, for small items and wine glasses.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2: PP works well. Getting it to print without warping is not the easiest. Maybe try an enclosure to increase your odds.
Update: The PETG didn't last (warped, broke). Also, high temp glass filled PLA from polymaker (ht-pla-gf) didn't work (broke). I'm trying PP now, which seems to be working. The problem with PP is that it only sticks to itself, not the print bed. To print with PP, stick a strip of clear packing tape (also made from PP) onto the print bed.
This is for some Fisher and Paykel dishwashers. I have the double drawer style. This is the connector piece for the side racks, for small items and wine glasses. The rounded part of the connector often breaks over time, leaving the side rack unstable or falling off.
I changed the side piece to have a smaller bump, which still gives a satisfying click when engaged, while not pressuring the material as much.
Include supports on the plate to make sure the side pegs print well.
Of note, I did 100% infill for the rounded side parts and 15% infill for the middle connecting bar.
I also created a second version with less material that prints faster. It acts the same as the larger one, as far as I can see, so it might be the best choice.
