Air Horn Stand for Backpacker stove - Fusion 360 Parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air horns are skinny and tippy, add a stand. Add one that fits in a pot or ice cream container.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 29
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I built this stand after seeing mention of using an airhorn as an isobutane canistor for an ultralight backpacking stove on youtube, then found this BPL Instagram post and BPL post, and wanted to give designing the stand a shot!
Later in my journey, I found that @JanRezac_600604's design was the design I had seen in pictures. I have no OpenSCAD experience and figured others probably would like an F360 version. Then when posting this, I realized that @TylerReeves_202451 did almost this exact same thing, probably originally working with Jan. Woops 😬
Does this add anything that Tyler or Jan's models, I dunno. I designed my CAD differently and the stand works great.
My design holds the can with a slight interference fit with “nubs” on each leg. The weight of mine came out to be a little less than Tyler's (every fraction of a gram counts, right...right).
File is parametric. Feel free to edit based on your horn or needs. You should be able to tune to your needs from the Parameters table.

I have tested in both PLA and PETG. Both are strong and flexible due to layer lines being in the stress path. Designed for 0.2mm layer lines.
Tested with a Super Blast Party Horn from Walmart and Ozark Emergency Air Horn