Spaceballs, The Yo-Yo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I see your Schwartz is as big as mine
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 15
- Makes
- 1
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
May the Schwartz be with you.
Requires:
2x m5ns square nuts.
1 m3x16 mm grub screw axle.
1 C size yo-yo bearing.
Print both halves, insert the nut into the square pocket in the smaller half and thread the outer half into it to hold the nut in place. Add bearing and axle. Throw at ludicrous speed.
Requires supports, recommended setting is organic supports with 0.2 mm separation, no supports on bridging.
Note: I found it works best if you print a MegaMaid edition, which requires adding a band of heavy filament (such as stainless steel filled filament) just above the threads in the outer half. I have included a 3mf with the megamaid split included. Not required but will give you longer spin time and less vibe.