Fast firework stabilizer. Don't let your 4th of July end in the ER!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to fit most any size of fountain or aerial base.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 72
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
General:
A quick, adjustable firework stand. Don't let your fourth end in the ER. Stabilize those aerials
Why I designed this:
I designed this to help make everyone's fireworks a little safer.
Printing notes:
Layer height: .2
Recommended Material: PETG, ASA/ABS, PA, or PC for heat resistance
Supports: None
Infill: 20% Gyroid or triangle
Walls: 3
Other Modifiers: Print as oriented
Material Quantity: ≈280grams
I printed from PETG on Centauri Carbon at .16 layer height with 20% gyroid infill.
Cautions and updates:
Don't overtighten the screws , or it will crack the threads. Most of the force should be taken by the support members.
Requires (4) 30mm M3 bolts for the hinged supports.
7/3/25 I'm still printing the first test piece because I thought of this last minute, but will update with real photos in the morning.
7/4/25 assembly is complete. I found that the threads on the thumb screws were 0 tolerance, so I’ve added a .2 mm clearance and a chamfer. I also added a boss to the nut to improve thread engagement. Everything else fit perfectly as printed. I also corrected the print orientation on a couple of files that were standing on their sides as imported.. Enjoy and stay safe!
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!

Also check out:
https://fabtechmfg.square.site/