Dust collection adapter DN100 - 2*DN40
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust collection adapter from an incoming 100 mm hose to two 40 mm hoses. I use this on my router table to connect both…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dust collection adapter from an incoming 100 mm hose to two 40 mm hoses.
I use this on my router table to connect both the fence and the router itself to my dustcollector. Works fine with @MariusHornberger 's hose clamps.
You have to print 1 x the base piece ("Grundkörper"), 1 x the 100 mm connector ("Stutzen DN100") and 2 x the 40 mm connector ("Stutzen DN40"), then assemble everything with a bit of superglue.
The middle screw is a bit hard to get to, if you don't have a long and thin screwdriver. It holds fine with just two screws, though.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
40%
Filament: any PLA or PETG any
Category: Parts