Humidity Sensor Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple, self-supported stand for a typical square humidity and temp sensor.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 1
- Views
- 84
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I was in need of a simple stand for a typical square humidity sensor. I'm currently using it inside of a filament storage dry box, but there are plenty of other use cases for it.
I printed mine out in PLA with a 0.2mm Structural setting, 15% infill, and a HF0.4 nozzle on a Core One.
I highly recommend organic supports specifically for the long overhang on the top. You shouldn't need supports for the text. I manually painted on the support points and had success with that.
These are the specific sensors I used: https://www.amazon.com/dp/B08P3QJJZL however anything with the same dimensions will do just fine. The dimensions of the square cutout in the model are 45.5mm x 26.6mm.