1.25 " cheshire eyepiece for telescope - reparable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
reparable collimation tool for your telescope (Newtonian, cassegrain, RC, ...)
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 86
- Makes
- 3
- Views
- 317
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version.
I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed.
The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be reparable. It is possible to use it without crosshairs if needed, as it is a separate body.
I added a cap to protect it.
If you want to print the piece “capuchon”, please print the V2. The V1 (in gcode, split and non split assembly) is too lose.
I use black PETG for the main body, and white PETG for the reflective part.
The white part is located in rotation thanks to 3 smalls guides, so it will not move. By the way, you can't go wrong while assembling it, thanks to the guides.
The crosshairs is located in the same way.
For a better handling, i added a fuzzy skin texture in PrusaSlic3r.
You can use this tool to collimate your telescope, weither a Newtonian, a Cassegrain or even a Ritchey-Chretien