1 / 2
SP MK10 Spec Boot mold
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small holes are for 3mm screws to secure the mold, flared holes are for injecting silicone (hold at angle and fill…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Small holes are for 3mm screws to secure the mold, flared holes are for injecting silicone (hold at angle and fill from "lower" hole until silicone comes out upper hole free of air bubbles). Use 2 part mold making silicone. Seal seam between mold pieces with electrical tape prior to filling.
Category: Sport & Outdoors