Marstek Venus E V2 Modbus Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert the included SP17 connector into a Modbus to Wifi bridge
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 64
- Makes
- 2
- Views
- 907
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Use these parts to convert the included SP17 connector into a houding for an ESP32
Space for an ESP32 C3 SuperMini and an RS-485 to RS-323 converter.
Printed in PETG with 0.25mm layer height in general areas and 0.8mm in the areas that have threads.
For assmebly, first solder the 4 wires to the connector (silicone wires are perfect for their flexibility.
Remove the seal from the SP17 back housing and place it into the body. Then screw the body onto the connector. You can now shorten the wires and solder them to the boards.
Use double sided tape to mount the boards into the body.